background image

7

 WARNING

ALWAYS shut off the tractor. Disengage the PTO, and 

allow all moving parts to stop BEFORE disconnecting or 

clearing tube, or emptying catcher.
Before leaving the operator’s position for any reason, 

engage the parking brake, disengage the PTO, stop the 

engine and remove the key.
To reduce fire hazard, keep the engine, rider and mower 

free of grass, leaves and excess grease. Do not stop 

or park rider over dry leaves, grass or combustible 

materials.

 CAUTION

Before you begin operating the unit be certain you have 

read all of the safety and operational information of this 

instruction sheet, as well as the Operator’s Manual for 

the tractor and any other attachments.

NOTE:  

Never operate on slopes greater than 17.6% (10°).

 CAUTION

Do not leave grass in bagger containers.  Empty 

containers after each use and before storing.  Failure 

to do so may result in spontaneous combustion which 

could develop into a fire.

Safety Decals

Several safety labels are installed on the unit to remind you   

of important information while you are operating your unit.
All  DANGER, WARNING, CAUTION and instructional 

messages on your rider, attachments and mower should 

be carefully read and obeyed. Personal bodily injury can 

result when these instructions are not followed. The safety 

decals below are on your product.
If any decals are lost or damaged, replace them at once.    

See your local dealer for replacements.
These labels are easily applied and will act as a constant  

visual reminder to you, and others who may use the      

equipment, to follow the safety instructions necessary for 

safe, effective operation.

Attachment Decal 

Decal - 
WARNING 

Thrown Objects Hazard
Part Number 1732819

Thrown objects hazard

• Objects thrown by the mower can seriously 
   injure or kill you.

• Do not open the hopper while the mower blades 
   are turning.

• Do not operate the mower without the complete 
   catcher in place. 

WARNING

1732819

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control 

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The 

triangle 

in text signifies important cautions or warnings which must be followed.

 GENERAL WARNING

• Know the unit’s controls and how to stop quickly. READ 

THE OPERATOR’S MANUALS.

• Read and obey all safety decals.
• Only allow responsible adults, who are familiar with the 

instructions, to operate the unit.

• Disengage the PTO. Shut off the engine and wait for 

all moving parts to stop before attaching, adjusting, or     

disconnecting any part of the collection system. 

• Check the collection system to make sure it is bolted 

tightly to the unit.

• DO NOT operate the unit without either the entire grass 

catcher or the deflector in place.

• Turn off the PTO to disengage the blades when not 

mowing.

• DO NOT mow in reverse unless absolutely necessary. 

Always look down and behind before and while 

travelling in reverse.

• DO NOT turn sharply when travelling alongside a 

building or any object. Slow down before turning.

• DO NOT carry passengers.
• When collection system is removed from the mower 

deck, the deflector must be properly installed.

• Collector bags are subject to deterioration and wear    

during normal use.  Inspect the bag periodically for 

tears, holes, or weak spots and replace with a new bag 

that meets manufacturer’s durability standards.

• For added stability and to prevent tipping or loss of 

control:

a. Use reduced speed on uneven ground and   when 

turning corners.

b. Reduce loads on hillsides. It is recommended that 

the collection system be kept only half full when 

negotiating any slopes. Start mowing on slopes 

when the collection system is empty.

c. Mow up and down the face of slopes; never across 

the face of any slope.

• Never operate on slopes greater than 17.6% (10°).

Operator Safety

No

t fo

r  

Rep

rod

uct

ion

Summary of Contents for ZT

















Reviews: