BEACON40
®
Light Systems
|
Smart Home Connection Instructions
4
Enable permissions and
press “Start scanning”.
Tap “Add Device” in the right
hand corner, which will prompt
a choice to “Add Manually” or
“Auto Scan”. If you choose “Auto
Scan,” please see directly below.
If you choose “Add Manually,”
skip to step 10.1.
The application will start
searching for devices.
Ensure that Beacon40 is
blinking yellow and blue.
When Beacon40 has been
found, it will appear on the
screen. Tap “Next”.
9.3
9.2
9.1
8
