Use and Maintenance Manual – VER. 2016-02
Page 3
Carefully read the warnings and instructions contained in this manual as they provide important information about SAFE USE and
MAINTENANCE.
KEEP THIS HANDBOOK WITH CARE NEAR THE MACHINE TO FACILITATE ANY CONSULTATION BY
OPERATORS
.
The wheel balancers have been made to balance wheels for automobiles (CAR), off-road vehicles (SUV), lorries (TRUCK). The
machines can work on wheels with diameter from 8" to 35" (or from 200 to 890 mm) and width from 2" to 20" (or from 50 to 500
mm). All functions and controls can be set via a number of keys arranged on a panel. The data is displayed on an LED display.
3. GENERAL SAFETY RULES
The wheel balancer must be used exclusively for the purpose for which it has been designed.
Any other use is considered INCORRECT and UNREASONABLE.
The wheel balancer may be used by authorised, trained personnel only.
Do not put any objects in the base which may affect the correct operation of the wheel balancer.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE TO PEOPLE OR PROPERTY CAUSED BY
UNAUTHORISED PERSONNEL OR IMPROPER, INCORRECT AND UNREASONABLE USE OF THE WHEEL
BALANCER.
THE WHEEL BALANCER SHOULD NOT BE MODIFIED OR TAMPERED WITH WITHOUT THE MANUFACTURER'S
PERMISSION. ANY UNAUTHORISED CHANGE MADE TO THE EQUIPMENT RELIEVES THE MANUFACTURER
FROM ANY LIABILITY IN CASE OF DAMAGE ATTRIBUTABLE TO SUCH ALTERATIONS.
3.1 Safety devices
The machine is equipped with the following safety devices: Rotation STOP [P10] button
.
It is forbidden to tamper with, bypass or remove the safety devices installed, this being a violation of the safety regulations at work.
REMOVING OR TAMPERING WITH SAFETY DEVICES ENTAILS A VIOLATION OF THE EUROPEAN SAFETY
DIRECTIVES.
4. TRANSPORT AND HANDLING
The wheel balancer is packed in a carton box on a pallet.
Transport and handling must be carried out BY AUTHORISED PERSONNEL ONLY, using a pallet truck or forklift and adopting
appropriate safety measures.
If the machine is not packed, take the following precautions:
PROTECT SHARP EDGES AT THE ENDS WITH SUITABLE MATERIAL (bubble wrap or cardboard).
DO NOT USE METAL WIRE ROPES FOR LIFTING.
SLING WITH STRAPS OF AT LEAST 200 cm IN LENGTH AND WITH A GREATER CAPACITY THAN 3000 kg.
DO NOT USE FORCE ON THE SHAFT AND/OR FLANGE (See Pictures F4.1 and F4.2).
Summary of Contents for VULTURE BP46
Page 1: ...BP46 VULTURE ...
