快速安装手册
http://www.whkj.com.cn
010
‐
51655555
●装纸 Paper Roll
安装步骤：
1.如图 1 所示,箭头位置轻轻按下，纸仓盖即打开。
2.把打印纸装入,并拉出一截(超出一点撕纸牙齿),注意把纸放整齐,纸的方向为有药液一
面(光滑面)向上,如图 3。
3.合上纸仓盖,打印头走纸轴压齐打印纸后稍用力把打印头走纸轴压回打印头。
4.接通打印机的电源,按 LF 键使机头转动，若纸走歪，再按下 LF 键。
Replacing the Paper Roll
1. As shown in Fig 1， press the lock follow the arrow.
2. Insert the paper into the printer, then pull out a small amount of paper. Notice
the direction of the paper according to Fig.3.
3. Close the paper cover. Press the platen roller back to the printer head.
4. Power the printer on, then press LF button, make the print head to run, and
the paper will come out.
