快速安装手册
http://www.whkj.com.cn
010
‐
51655555
●装纸 Paper Roll
安装步骤：
1.将纸轴装入纸卷,然后装入打印机纸仓内，将纸轴两边固定在卡槽内(如图 1)，同时注意
纸的方向有药液的一面（光滑面）向下。
2.压下锁扣，将打印纸装在打印单元与切纸单元中间，然后将打印单元与切纸单元压在一
起，注意把纸放整齐，将打印纸多于部分撕下如图 3.
3.把打印单元推入复位如图 4。
4.开机，按下 LF 键使机头转动，如果纸走歪，再按下 LF 键。
Replacing the Paper Roll
1.
Put the new paper on the paper roller, and install the roller firmly on the
printer. Notice the direction of the paper according to Fig.1.
2. Champ the cutting Lock，put the new paper between printer unit and cutting unit,
then push them together in combination according to Fig.2.Pull out a small amount
of paper according to Fig.3.
3. Push the printer unit to the original position according to Fig.4
4. Power the printer on, press LF button, make the print head to run, and the paper
will come out.
