For example:
If you choosed HDMI source1, then just aim the remote control of HDMI source1 to the “IR In”
cable which connected to the receiver.
2) Control the sinks from the sources
Step1: Connect 4pcs “IR Out” cables to “IR Out” ports on the receivers, connect 4pcs “IR In”
cables to the “IR In” ports on the matrix.
Step2: Affix the 4xIR emitter of “IR out” cables to the IR window of the 4xHDMI Sink.
Step3: Aim the remote of HDMI sink to related IR receiver of HDMI Matrix.
For example:
If you need control HDMI Sink1, then just aim the remote of HDMI Sink1 to the first “IR In”
port of HDMI Matrix.
3) Control the HDBaseT Matrix from the sinks
Aim the remote of the HDBaseT Matrix to the “IR In” cable which connected to the receiver.
5. Information shown on LCD panel
Pressing button in4 of output2 and in4 of output4 simultaneously for 3 seconds
to enter EDID setting menu.
Note: The digital 1, 2, 3 or 4 are for in1, in2, in3 or in4 of out1
5.1 EDID setting
EDID can be set via the EDID menu.
There are 12 sets of embedded EDID data, 4 set of user EDID. Or copy EDID
from TV on one of the output port.
1
:
1080P_2CH(PCM) ---(see note2)
2
:
1080P_ audio5.1
3
:
1080P_ audio7.1
4
:
1080P_3D_2CH(PCM)
9