Brigmton BSK 651 A, Instruction Manual

- Never load the product without supervision. 
- The product should only be charged at temperatures between 0 ° C and + 
45 ° C. 
- If charging at higher or lower temperatures, there is a risk that battery 
performance will be reduced and there is a potential risk of product 
damage and personal injury. 
- Load and store the product in an open and dry area, away from 
flammable materials. 
- Do not load it in sunlight or near live flames. 
- Do not load the product immediately after use. Allow the product to cool 
for one hour before loading it. 
- If the product is left to other people, for example, during a holiday 
period, it must be partially charged (20-50% load). Not fully charged 
- When shipped from the factory, the product has often only been partially 
loaded. Keep the product partially charged until it is used. 
- The skate must be cooled for at least 1 hour before packing. 
- It should not be left outside in a hot car in the sun. 
- When loading, do not drive the skate! 
- Always keep the protective cap connected to the DC connector! 
- Just remove the plug when loading the skate! 
- After charging is complete, remove the DC plug and reconnect it to the 
protective plug on the DC connector.