ALWAYS install equipment in a work area with adequate light and space.
ONLY operate on a solid, level, non-slippery surface that is nonflammable and away from sinks and water hazards
NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create hazards
and will void warranty.
WARNING TO AVOID SERIOUS PERSONAL INJURY
& PROPERTY DAMAGE:
GAS and GAS PRESSURE
CAUTION
This unit is factory supplied in Natural Gas. This unit can be converted to Propane gas by a licensed and certified gas technician.
Documentation may be necessary for warranty issues. Failure to comply with this instrction , will void warranty.
See the included L.P. conversion kit for gas coversion parts and instrutions.
!!
WARNING
Unit installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the National Gas installation Code, CSA-B149.1, or
the Propane installation Code, CSA-B149.2 as applicable and in accordance with local codes.
WARNING
The appliance and its individaual shutoff valve (to be supplied by user) must be disconnected from the gas supply piping system during
any pressure testing of that system at test pressures in excess of 1/2 psi(3.45kPa)
These models are designed, built, and sold for commercial use only.
Instructions must be posted in a prominent location. ALL safety precautions must be taken in the event the user smells gas. Safety
information can be obtained from your local gas supplier.
Unpack the griddle immediately after receipt. Remove the gas griddle from the crate; remove all packaging on and
surrounding the unit and be certain to remove all protective plastics and residues from all surfaces. Make sure that all
parts provided including the L.P. gas conversion kit are located.
If the machine is found to be damaged, save the packaging material and contact the carrier within five (5) days of
delivery. Immediately contact Brika or your local equipment dealer. You have no recourse for damage after five (5) days.
UNPACKING
!!
!!
!!
4
www.brikaequipment.ca
UNPACKING & INSTALLATION
