Evap
1
Section 1 – Delivery
1.1
Scope of supply
Before installing the Evap, check that the Evap Air Humidifier is complete and undamaged.
The following components are supplied with the Evap humidifier:
An EPP housing fitted with 2 round connections of R200 mm.
The following components are attached to the housing:
•
One fibreglass (1) absorbent matrix cassette with LegioSafe water filter
•
One (1) PTC electric heating element
•
One (1) cord with connection adapter for SHC80 sensor (L=1m)
•
One (1) water supply hose (L=1m; Ø=4mm; adapter ¾” outside)
•
One (1) cord with coupling for cord with mains plug (L=1m)
•
One (1) cord fitted with a temperature sensor T3 (L=2m)
Supplied separately are:
•
One (1) combined humidity-temperature sensor (SHC80)
•
One (1) cord with coupling for cord with mains plug (230VAC; L=1m)
•
One (1) PVC water drain hose (L=50cm; Ø=15mm)
1.2
Evap accessories
Product description
Product code
Evap controller
351020
