Inspect contents of the box to ensure all parts are included and undamaged.
2
OPERATING INSTRUCTIONS
READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL
BEFORE OPERATING SPOTLIGHT.
Part List:
Q-Beam LED
Rechargeable Spotlight
120-Volt AC Charger
Owner’s Manual
1
2
2
1
Lockout Switch
Trigger
Switch
To Operate
IMPORTANT:
Turn spotlight OFF before
charging from AC outlet. The
battery cannot charge if the
spotlight is ON. Leaving spotlight
ON during charging may cause
damage to battery and AC
charger.
Step 1:
Follow charging instructions on page 3 of this manual and
allow battery to fully charge.
Step 2:
Select High, Low or RED (night vision) setting using the
selector switch on the back of the spotlight.
Step 3:
Press trigger switch in handle once to turn spotlight ON.
Press trigger switch again to turn spotlight OFF.
Step 4:
To lock trigger switch in the Off setting, slide down lockout
switch on side of handle. To release, slide lockout switch up.
WARNING:
Never place spotlight face down when light is on or
is still hot from recent use. Doing so could burn/ignite
surfaces such as seats, carpeting, etc. and cause
major property damage. Always turn spotlight off
when not in use.
•
A fully charged battery will provide approximately 5-10 hours of
continuous light.
•
Do not allow battery to completely discharge. A dim light indicates
a low battery. Turn OFF spotlight and recharge battery as soon as
possible.
INS_800-5000-0.qxd 9/9/09 11:45 AM Page 3
