4
Top Housing
Lens
Battery
Changing Battery
Step 1
Remove lens from top housing by
turning lens clockwise.
Step 2
With top housing upside down
(solar panel facing down), push
tab on battery compartment lid
and remove the lid.
Step 3
Remove battery. Replace with new
Ni-Cd rechargeable battery.
Step 4
Replace battery compartment lid.
Step 5
Attach the lens by aligning the
tabs with the slots in top housing.
Turn counter-clockwise to lock in
place.
NOTE:
These lights utilize L.E.D.
(Light Emitting Diode)
technology. There are no
bulbs to replace.
Top Housing
Battery
Compartment Lid
It is important that the solar panel is
kept free of dirt and debris. A dirty
solar panel will not allow the battery to
fully charge. This will shorten the life
of the battery and cause the light to
malfunction. Clean regularly with a
dampened cloth or paper towel.
Cleaning
Tabs
IMPORTANT:
The EPA Certified RBRC
®
Battery
Recycling Seal on the nickel-cadmium
(Ni-Cd) battery contained in our product
indicates The Brinkmann Corporation is
voluntarily participating in an industry program to collect
and recycle these batteries at the end of their useful life,
when taken out of service in the United States or Canada.
The RBRC
®
program provides a convenient alternative to
placing used Ni-Cd batteries into the trash or the
municipal waste stream, which may be illegal in your
area. Please call 1-800-8-BATTERY™ for information on
Ni-Cd battery recycling and disposal bans/restrictions in
your area. The Brinkmann Corporation’s involvement in
this program is part of our commitment to preserving our
environment and conserving our natural resources.
INST_822-2513-2.qxd 2/1/05 9:41 AM Page 5
