==================================================================================================
x2
Assembly Step 3-A
Assembly Step 3-B
Hardware Panel 3
1. Align the tow bars.
2. From above, insert both
5/16 x 3” Hex Bolts (
37
)
from Hardware Panel 3, as
illustrated.
3. Beneath the tow bars, tightly
secure each bolt in place with 5/16”
hex lock nuts (
2
).
1. At the end of the tow
bars (
20
), from above, insert
the Drawbar Pin (
50
).
2. Secure the pin with a Hairpin Cotter (
51
).
NOTE: For initial use, you may need to tap
or push the hairpin cotter into place by
applying some pressure with a tool.
37
2
Hardware Panel 3
20
20
20
20
37
50
37
2
2
51
ASSEMBLY
English Manual
9
1018947-C
