background image

3

Safety Information

WARNING: 

To reduce risk of injury and property damage, you must read this entire manual before 

assembling, installing, and operating the filtration system.

WARNING: 

In order to ensure safety and to avoid injury and property loss to you and others, please be 

sure to follow the following safety precautions. Misuse of filtration system or ignoring safety 

precautions may lead to accidents.

Installation needs to comply with state and local laws and regulations.

 

System must be installed indoors and away from possible environmental damage.

 

Do not place heavy objects on top of the product.

 

Do not place flammable, volatile substances near the product.

 

Do not place the product near a heat source or open fire.

 

Please install the product as close as possible to the floor drain.

 

Do not allow children to operate, touch, approach, or climb on the product without guardians present. 

 

Strong magnetic devices nearby may cause fire, product damage, or circuit failure. Wet and dusty areas 
may cause circuit damage.

 

The product must be installed or moved by professional personnel. Disassembling at your own discretion 
may damage the product.

 

When the water does not meet the municipal water standards (including high sediment content and 
excessive residual chlorine, etc.), a professional installer must install a pretreatment device before installing 
the faucet.

 

The optimal water pressure of this product is 0.1-0.4 MPa. If the water pressure is lower or higher than this, 
install a pressure-boosting or pressure-reducing device accordingly.

 

In case of product failure, disconnect it from its water source and contact customer service.

 

When the ambient temperature is low, the flow rate will decrease, which is an inherent feature of the filter.

 

Replace the filter regularly.

 

It is normal for the product to have slight vibration and noise when processing water.

 

If you do not use this product for a long period of time, shut off the feed water adapter. Upon first use after 
an extended period of time, run water for 3-5 minutes.

Intended Use

This filtration system is intended to be used in household and similar applications such as:

 

Staff kitchen areas in shops, offices, and other working environments

 

Farm houses

Summary of Contents for amphara UF100FWHT












Reviews: