background image

 

 

Self–Regulating Heating Cable 

Installation & Maintenance 

Instruction Manual 

SAVE THESE INSTRUCTIONS! 

Additional copies of this manual are available upon request.

 

 

You must read and understand this manual before installing, operating, or 
servicing this product. Failure to understand these instructions could result 
in an accident causing serious injury or death. 
 
Keep these instructions for future reference. 

Language 

Page 

English ................................................................................................................................................................................................................................. 1 

Spanish (Español) ............................................................................................................................................................................................................... 33 

French (Français) ................................................................................................................................................................................................................ 65 

German (Deutsch) .............................................................................................................................................................................................................. 97 

Italian (Italiano) .................................................................................................................................................................................................................. 129 

English 

Self Regulating Heating Cable 

© BriskHeat

®

 Corporation.  All rights reserved.  

TABLE OF CONTENTS 

IMPORTANT SAFETY INSTRUCTIONS ........................................................................................................................................................................... 3 
PART INTENDED USE ...................................................................................................................................................................................................... 4 
PART NUMBER MATRIX .................................................................................................................................................................................................. 4 
TECHNICAL PARAMETERS ............................................................................................................................................................................................. 5 
GENERAL INFORMATION ................................................................................................................................................................................................ 6 

How Heating Systems Work ......................................................................................................................................................................................... 6 

PRODUCT SELECTION .................................................................................................................................................................................................... 6 
RECEIPT & STORAGE ..................................................................................................................................................................................................... 6 

Receipt .......................................................................................................................................................................................................................... 6 
Storage .......................................................................................................................................................................................................................... 6 

INSTALLATION ................................................................................................................................................................................................................. 6 

Scheduling .................................................................................................................................................................................................................... 7 
Pre-Installation Check ................................................................................................................................................................................................... 7 
Heater Handling ............................................................................................................................................................................................................ 7 
Heating Cable Location ................................................................................................................................................................................................. 7 
Straight Tracing ............................................................................................................................................................................................................. 7 
Spiraling ........................................................................................................................................................................................................................ 8 
Attachment .................................................................................................................................................................................................................... 8 
Cutting the Heating Cable ............................................................................................................................................................................................. 8 
Installation Details ......................................................................................................................................................................................................... 8 

SYSTEM COMPONENTS ............................................................................................................................................................................................... 11 

System Component Compatibility  .............................................................................................................................................................................. 12

 

SLCBL Connection / Termination Kits  ....................................................................................................................................................................... 13 
SLCBL, SLMCBL, SLHCBL Connection / Termination Kits  ....................................................................................................................................... 14 
FM APPROVED SLCAB connection / termination kit ................................................................................................................................................. 15 
FM APPROVED SLMCAB connection / termination kit .............................................................................................................................................. 15 
CSA APPROVED SLCAB AND SLMCAB connection / termination kit ....................................................................................................................... 16 

THERMAL INSULATION ................................................................................................................................................................................................. 17 

Pre-Installation Checks ............................................................................................................................................................................................... 17 
Installation ................................................................................................................................................................................................................... 17 
Marking ....................................................................................................................................................................................................................... 17 

THERMOSTATS & SENSORS ........................................................................................................................................................................................ 17 
ELECTRICAL REQUIREMENTS ..................................................................................................................................................................................... 17 

Voltage Rating............................................................................................................................................................................................................. 17 
Electrical Loading ........................................................................................................................................................................................................ 18 
Ground Fault Protection .............................................................................................................................................................................................. 24 
Waterproofing .............................................................................................................................................................................................................. 24 

TESTING ......................................................................................................................................................................................................................... 24 

Recommendations ...................................................................................................................................................................................................... 24 
Procedure .................................................................................................................................................................................................................... 24 

START-UP ....................................................................................................................................................................................................................... 27 

Heat-up Time .............................................................................................................................................................................................................. 27 
Diversity Factor ........................................................................................................................................................................................................... 27 

OPERATION & MAINTENANCE ..................................................................................................................................................................................... 27 

System Design, Installation & Documentation ............................................................................................................................................................ 27 
Preventive Maintenance.............................................................................................................................................................................................. 27 
Visual Inspections ....................................................................................................................................................................................................... 27 
Frequency ................................................................................................................................................................................................................... 27 
Personnel Training ...................................................................................................................................................................................................... 27 
Maintenance ................................................................................................................................................................................................................ 27 
Piping Repairs ............................................................................................................................................................................................................. 27 

DAMAGED PRODUCTS .................................................................................................................................................................................................. 28 
TROUBLESHOOTING GUIDE ........................................................................................................................................................................................ 28 
WARRANTY INFORMATION .......................................................................................................................................................................................... 32 

Summary of Contents for SCHCBL Series

















































































Reviews: