General Cleaning
General Cleaning
General Cleaning
General Cleaning
Your fitting has a high quality finish and should be treated with care to preserve the visible
surfaces. All finishes will wear if not cleaned correctly. The only safe way to clean your
product is to wipe with a soft damp cloth. Stains can be removed using washing up liquid.
All bathroom cleaning products (powders and liquids) will damage the surface of your
fitting, even the non-scratch cleaners.
Note:
Note:
Note:
Note: Never use abrasive detergents or disinfectants or those containing alcohol,
hydrochloric acid or phosphoric acid.
Bristan recommend E-cloth for cleaning all of our bathroom &
kitchen products. Using just water, E-cloth gives a smear free,
deep clean by breaking up and holding dirt, which normal cloths
leave behind. Order through your Bristan stockist (order code: E CLOTH).
Maintenance
Maintenance
Maintenance
Maintenance
We advise that your fitting is regularly serviced in hard water areas to maintain optimum
performance (see map of Hard Water Regions in the UK on page 09.
If your fitting begins to leak the following should be carried out;
If your fitting begins to leak the following should be carried out;
Isolate both hot and cold water supplies to the tap by either:
•
Turning the water supply off at the mains stopcock or
•
Turning off the isolation valves to the tap.
1. Remove the cap on the handle body to reveal the concealed grub screw.
2. Unscrew the grub screw and pull the handle away from the mixer body.
3. Unscrew the shroud , remove the cartridge retaining nut and pull out the cartridge.
4. Carefully clean the cartridge seals and seating.
5. If necessary replace the cartridge.
Please visit www.bristan.com/sparesfinder
www.bristan.com/sparesfinder
www.bristan.com/sparesfinder
www.bristan.com/sparesfinder in order to find spare parts for this product.
6. Replace the cartridge into the tap body and tighten retaining nut fully.
7. Replace all remaining components and turn on water supply.
8. Check for leaks and contact our helpline if problem persists.
08
