2
4
3
1
Pack Contents
Installation Instructions
& User Guide
Specifications
Inlet Water Temperature
Inlet Connections
Dynamic Water Pressure
Tools You’ll Need
Prior to Installation
Adjustable Spanner
Hexagonal Keys
Installation
Please leave these instructions
with the end user
Product Code: NR BASNW C (D4)
All products manufactured and supplied by Bristan are safe to use
provided that they are installed, operated and receive regular
maintenance in accordance with these instructions.
This product needs to be installed in accordance with, and meet the
requirements of the Water Supply (Water Fittings) Regulations 1999
and current by-laws. For full Installation Requirements & Notes (IRN)
please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure
ease of future maintenance.
Before installing this product the water supply must be
thoroughly flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will
invalidate the guarantee.
Full access must be made available for future
maintenance/servicing purposes.
If in doubt, contact a registered plumber or your Local Water
Authority or the Secretary of the Institute of Plumbing,
address as follows:-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex,
RM12 6NB, Tel: 01708 472791
M10 x530mm
Flexible Tails
Screw in the flexible
tails by hand.
DO NOT
OVERTIGHTEN.
Connect the hot
and cold water
supplies.
Your tap is now
ready for use.
IMPORTANT
Turn on w
ater
supply f
or a few
minutes and check
all joints and
connections f
or
any leak
s.
65°C
5°C
25°C
Cold Water Supply
Min: 5°C Max: 25°C
Hot Water Supply
65°C Recommended
To replace any spare parts
for your tap, why not
scan the QR Code or
visit
www.bristan.com
and search for your product.
Spare Parts
REMEMBER
To fit
isolation v
alves
for maint
enance
purposes
x1
x1
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
Pressure
BAR
1.0
5.0
4.0
2.0
3.0
0.
Maximum Static Pressure:
10.0 bar
Min:
0.2 bar
Max:
5.0 bar
Pipe Cutter
Fit the tap to the
basin, ensuring
the base washer
is in place.
Secure the tap to the basin
by using the fixing kit.
Slight
bend
90 °
angle
Kinks
Curved
round
Twists
Flexible Tail Positions
REMEMBER
Hot on the
left, cold on
the right.
5
Operation
x1
x1
On
Hot
Cold
