Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
9-6
Carefully put the fuel level sender into the tank and attach it using bolts with washers
–
use LOCTITE 565 or equivalent sealant on bolts thread.
Connect electrical wires to the fuel level sender (electrical connection
– see
Check fuel system tightness (see 9.4.1).
Connect the battery and check fuel gauge function.
Install the wing (see 4.3.2).
Fig. 9-4
Float mechanism
9.3.7
Fuel drain valve removal
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 1/2 in
Drain the fuel from the tank or gascolator.
Remove drain valve from the tank or gascolator
– unscrew it.
Check “O” ring and the spring.
9.3.8
Fuel drain valve installation
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 1/2 in
Set drain valve in the tank or gascolator
– use LOCTITE 565 or equivalent sealant.
Fill the tank with fuel and check drain valve tightness.
Summary of Contents for S-LSA
Page 2: ......
