Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
10-19
Fig. 10-16
Bolt tightening sequence
Remove spark plugs of the engine and secure the airplane against its movement (see
Check out, possibly adjust the blades pitch of propeller according to the propeller
manual.
Tighten up bolts (7) gradually according to the Fig. 10-16, for torque moments refer to
the propeller manual, and measure the difference in distance of individual blade tips
from marking (see Fig. 10-17).
The difference can be max. 1.5 mm (0.06 in). Possible bigger differences can be
corrected by repetition of the procedure from point (d) or (f).
X ... distance of the propeller tip from the marking
Fig. 10-17
Check of axial propeller running
–out
Secure bolt heads (7) by locking wire (see 15.8.2).
Put the propeller spinner (1) on the propeller and attach it with bolts.
Install spark plugs on the engine. Tighten up with torque 2.073 kg.m
(15 lb.ft)
.
10.3.5
Exhaust system removal
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
wrench size 13
pliers
small wire hook (spring removal/assembly jig)
Summary of Contents for S-LSA
Page 2: ......
