Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
11-6
11.3
Removal / Installation
11.3.1
Removal of the onboard battery
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
screwdriver
wrench size 8
Remove engine cowlings
Disconnect the contacts from the battery.
Disconnect the draw band of the battery and remove the battery from the airplane.
11.3.2
Installation of the onboard battery
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
screwdriver
wrench size 8
Install the battery into the bracket on the firewall.
Fasten it with draw band so that the battery cannot move in the bracket.
Grease the battery contacts with lubricating grease and install the clamps on them from
the onboard electrical network.
Install the engine cowlings.
11.3.3
Removal of the optional strobe/position lights
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
screwdriver
Remove bolts attaching the cover glass of strobe/position lights.
Remove bolts attaching the strobe/position lights to the wing tip, thus releasing the
lights.
Remove strobe/position light and disconnect the wire.
11.3.4
Installation of the optional strobe/position lights
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
screwdriver
Summary of Contents for S-LSA
Page 2: ......
