Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
3-6
3.3.2
Canopy installation
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
socket wrench
7/16”
screwdriver
pliers
At installation of the canopy, follow the Fig. 3-3:
Set the canopy on the airplane fuselage.
Insert the bolts and the nuts into the hinges (6) of the canopy (1). Tighten up the joint.
Insert ends of gas strut in to the pin (7) in the fix frame of the canopy and on the foldable
frame, secure it with the securing spring (8).
3.3.3
Gas strut removal
Type of maintenance: line
Authorization to perform:
Sport pilot or LSA mechanic
Tools needed:
screwdriver
pliers
At removing of the gas strut, follow the Fig. 3-3:
Open the canopy and fix it against closing after gas strut removal.
Remove the securing spring (8) from the gas strut pin (7) on foldable canopy frame and
on the fixed frame.
Remove the gas strut. Beware of canopy closing!
Summary of Contents for S-LSA
Page 2: ......
