Document: SLSA-MIP-5-4-0-US
Date of Issue: 05/2016
Revision: -
8-7
8.3.7
Removal of the main landing gear leg
Type of maintenance: heavy
Authorization to perform:
LSA mechanic or A&P mechanic (Airframe and Power plant)
Tools needed:
wrench size 9/16 in, 1/2 in
Follow Fig. 8-5 at removal:
Jack and support the airplane (see 14.2).
Disconnect the brake line (1).
Disconnect main gear leg (2), stirrup (3) and attachment bolts (4).
Remove the bolts (4) and stirrup (3) from the gear channel (5).
Remove the landing gear leg (2) from the attachment channel and put it on a suitable
place.
Fig. 8-5
Removal / Installation of the main landing gear leg
1
– Brake line
2
– Main gear leg
3
– Stirrup
4
– Attachment bolt
5
– Gear channel
Summary of Contents for S-LSA
Page 2: ......
