23
HOW TO INSTALL
F. Replace the comfort pad and centre panel flap, ensure
the harness buckle is repositioned through the panel,
clip any plastic fasteners that retain the cover. For
smaller babies replace the insert pad (if supplied). Do
not use insert pad if the child's shoulders reach the
lower shoulder height marker or the child no longer
fits the insert. See page 28 for advice on positioning
the shoulder straps.
NOTE:
Seatbelt extenders should not be used if the
seatbelt is not long enough to secure the child restraint.
If they are used then the buckle must not enter the
seating zone.
G. Fit the attachment clip to the car's anchor fitting as
shown right. Make sure to remove as many twists as
possible from the upper anchorage strap.
Attachment Clip
Car's Anchor Fitting
BABY USE REARWARD FACING
