08
09
10
11
14
01
02
07
03
04
06
05
12
15
17
16
13
19
18
Please observe the instructions on the use of child restraint systems described
in your vehicle owner’s manual.
The seat may be used in all vehicles equipped with the ISOFIX anchoring
systems. Please consult your vehicle owner’s manual for information the seats
which are approved for child safety seats in the weight class 0-18 kg.
The fastening with ISOFIX and support leg is based on semiuniversal approval.
The seat may be used only in those vehicles cited in the enclosed vehicle type
list. This type list is constantly updated. The latest version can be obtained from
us or from www.britax.eu / www.roemer.eu.
You can use your child car seat as follows:
NEXT CHILD SAFETY SEATS
USE IN THE VEHICLE
PRODUCT OVERVIEW
Shoulder pads
Harness buckle
Headrest
Cover
ISOFIX insert guides
ISOFIX attachement points (car)
Shoulder straps
01
02
03
04
05
06
07
ISOFIX indicators
Recline button
Adjustment strap
Adjusting button
Release button
08
09
10
Fabric loop
11
Locking arms
12
13
14
Support leg
15
16
Support leg indicator
17
Adjustment buttons
18
To ensure the full protective effect of the child safety
seat:
• In the event of an accident with an impact speed above 10
km/h it is possible that the child safety seat may have been
damaged, but that the damage may not be immediately obvi
ous. In this case the child safety seat must be replaced.
Please dispose of it properly.
• Regularly check all important parts for damage. Make sure
that the mechanical components in particular are all in per-
fect working order.
• To prevent damage, ensure that the child safety seat does
not become jammed between hard objects (car door, seat
runners etc.).
• Always have the child safety seat checked if it has been
damaged (e.g. if it is dropped).
• Never lubricate or oil parts of the child seat.
• In order to properly protect your child, it is imperative that
you install and use the DUALFIX exactly as described in this
manual.
Please observe the waste disposal regulations in your country.
CARE INSTRUCTIONS
Disposal of packaging
Container for cardboard
Cover
Residual waste, thermal utilisation
Plastic parts
In accordance with the labelling in the
designated container
Metal parts
Container for metals
Harness straps
Container for polyester
Buckle &latch
Residual waste
In the direction of travel
Yes
1)
Against the direction of travel
Yes
1)
With 2 point or 3 point vehicle belt
No
On seats featuring:
ISOFIX attachments (between seat surface and
backrest)
Yes
2)
1) In the direction of travel 9-18 kg / Against the direction of travel 0-18 kg
2) If there is a front airbag: Slide the passenger seat a long way back and refer to any
instructions in vehicle owner’s manual.
3) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the
vehicle seat is also approved for use by adults. The seat must not be positioned anywhere
where it is in range of an airbag which is being deployed.
(Please observe the applicable regulations in your country)
BrITAX rÖMEr
child safety seat
Tested and certified ac
-
cording to ECE* r 44/04
Group
Body weight
DUALFIX
0+ & 1
0 to 18 kg
• The child safety seat has been designed, tested and certified according to the requirements of the Euro-
pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certifica-
tion number are located on the orange certification sticker (sticker on the child safety seat).
• This certification will be invalidated if you make any modifications to the child safety seat.
• The DUALFIX child safety seat must only be used to secure your child in the vehicle. It must never be
used as a seat or toy in the home.
• Risk of injury due to unauthorised modifications! Unauthorised technical modifications may reduce or
entirely void the seat´s protective properties. Do NOT make any technical modifications to the baby seat.
• Use the baby seat only as described in the user instructions.
*ECE = European Standard for Child safety Equipment
Storage compartment
19
DUALFIX base
BrITAX rÖMEr Child safety seats
Testing and certification
in accordance with ECE r 44/04
rearward facing
Forward facing
Group
Body weight
MAX-WAY
1 – 2
9 – 25 kg
MULTI-TECH 2
1 – 2
9 – 25 kg
KIDFIX /KIDFIX SICT
2 – 3
15 – 36 kg
KID / KID plus
2 – 3
15 – 36 kg
0–18 kg
9–18 kg
CARE AND MAINTENANCE
Care for the harness buckle
It is vital for the safety of your child that the harness buckle works correctly. Malfunc-
tions of the harness buckle are usually caused by accumulations of dirt or foreign
bodies. Malfunctions are as follows:
• The buckle latches are ejected only slowly when the red release button is
pressed.
• The buckle latches will no longer lock home (i.e. they are ejected again if you try
to push them in).
• The buckle latches engage without an audible „click“.
• The buckle latches are difficult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
remedy
Wash out the harness buckle so that it functions properly once again.
Cleaning the cover
Please be sure to use only genuine BRITAX RÖMER replacement seat covers,
as the seat cover is an integral part of the child safety seat which plays an impor-
tant role in ensuring that the system works properly. Replacement seat covers
are available from your retailer.
• The child seat must not be used without its cover.
• The cover can be removed and washed with a mild detergent using the washing
machine‘s cycle for delicate items (30 °C). Please observe the instructions on
the washing label of the cover.
• The plastic parts can be cleaned using soapy water. Do not use harsh
cleaning agents (such as solvents).
• The harnesses can be washed in lukewarm soapy water.
• The shoulder pads can be washed in lukewarm soapy water.
CAUTION!
Never remove the buckle latches 21 from the straps.
CAUTION!
The child seat must not be used without the seat cover.
removing the cover
1. Grasp the recline button
10
and move the seat shell 26 downwards into the
upright position.
2. Loosen the harness straps as far as possible.
3. Open the harness buckle 07 (press the red button).
4. Slide the headrest 04 to its lowest position.
6. Remove the cover of the headrest 04 .
7. Open the poppers on the left and right of the rear part of the cover.
8. Unhook the elastic seam of the cover under the edge of the seat shell.
TIP: Start at the handles on the side and at the upper edge of the seat shell.
9. Pull the cover up and over the bezel of the strap adjuster.
10. Feed out the harness buckle 07 and the end of the strap from the cover.
11. Pull the cover upwards a little and then put it with the cutout over the headrest 04 .
Refitting the Cover:
Simply follow the steps in the opposite order.
CAUTION!
Check that the harness straps are not twisted and that they have
been correctly inserted in the belt slots on the cover.
removing the shoulder pads:
1.
Loosen the 5-point harness of the child seat as much as possible. Unhook the
shoulder straps
06 on the backside of the childseat from the connecting piece
28 .
2.
Pull below both, the shoulder pads 05 and the two shoulder straps
06 to the
front through the slots 29 . (Frontside of the childseat)
3.
Slide the belt loops 32 off of the plastic extensions 30 of the shoulder belt
height adjuster 31 .
4.
Pull the shoulder pads 05 through the slots 29 to the front.
5.
Remove the shoulder pads 05 from the shoulder straps 06 .
Refitting the shoulder pads:
Simply follow the steps in the opposite order.
CAUTION!
Never use the child seat without correct installed shoulder pads.
04
10
26
EASY ACCESS FUNCTION
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
t: +49 (0) 731 9345-199/-299
f: +49 (0) 731 9345-210
e: info@de.britaxeurope.com
www.roemer.eu
BRITAX EXCELSIOR LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
t: +44 (0) 1264 333343
f: +44 (0) 1264 334146
e: helpline@uk.britaxeurope.com
www.britax.eu
When used in rearward facing mode:
Group 0+ (0-13 kg)
1.Grasp the recline button 10 and put
the child seat into the most reclined
position.
2.Press the grey rotation button 23 and
turn the seat 90° into the Easy Access
mode
CAUTION!
Before every journey:
make sure that the rotating part of the
child seat is fully engaged by making
sure the child seat is in a fixed position.
Group 1 (9-18 kg)
1. Grasp the recline button 10 and put
the child seat whilst pressing the grey
safety button 20 into the most upright
position.
2.Press the grey rotation button 23 and
turn the seat 90° into the Easy Access
mode
CAUTION!
Before every journey:
make sure that the rotating part of the
child seat is fully engaged by trying to
turn the seat around in both directions.
When used in forward facing mode:
Group 1 (9-18 kg)
1. Grasp the recline button 10 and
put the child seat into the most upright
position.
2. Press the grey rotation button 23
and turn the seat 90° into the Easy
Access mode
CAUTION!
Before every journey:
make sure that the rotating part of the
child seat is fully engaged by trying to
turn the seat around in both directions.
The DUALFIX 360° seat rotation which makes it easier to get your child into or out
of the child seat (Easy Access Function).
The DUALFIX has a grey safety button 20 which must be pressed when changing
between group 0+ and group 1. The grey safety button 20 prevents that the child
seat is used by mistake in the wrong group for your child.
20
23
10
28
32
31 30
29
05
06
07
21
DUALFIX
0 - 18 kg
9 - 18 kg
0 ~ 4 y
User instructions
GB
www.britax.eu
EDV
-Nr
. 2000009861 13/03
