14
15
1
Release the buckle and open
the CLICKTIGHT to access
the lower connectors.
* Locate the two slots in the
CLICKTIGHT cover.
* Squeeze the CLICKTIGHT
release levers.
LATCH with CLICKTIGHT
Before you begin:
IMPORTANT:
It is not necessary to use LATCH to position this child
restraint in booster mode. To use this seat in booster mode without
LATCH, see instructions for
Securing Your Child
on page 18.
IMPORTANT:
Use lower anchors only to position this child seat
in your vehicle seat. Secure your child using the vehicle’s lap-
shoulder belt system.
• Check that your vehicle has lower anchors.
• Check that your vehicle has a top tether anchor.
• Loosen the Versa-Tether and place it over the child seat
back to keep it from becoming pinned between the child
seat and vehicle seat during positioning.
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat.
OR
OR
2
Route the lower connector
strap along the green belt path
and firmly press the lower
connectors onto their adjacent
lower anchors.
* A click confirms attachment.
* Verify that the strap is not
twisted.
3
Pull the end of the lower
connector strap to remove
slack.
4
Close the CLICKTIGHT.
* A click confirms the
CLICKTIGHT is secure.
5
Firmly press the Versa-Tether
hook over a designated
vehicle tether anchor. Remove
slack.
6
Secure excess webbing with
the elastic strap.
Positioning the Child Seat: Booster Mode
Aircraft Installation
Summary of Contents for FRONTIER 90
Page 50: ...96 Notas ...
