Instructions for Installation & Use
Instructions for Installation & Use
70
71
TRAVEL SYSTEM
BRITAX CLICK & GO™ADAPTOR
* Refer to page 22 for handle position
CAUTION:
RELEASING THE BABY CAPSULE FROM
THE STROLLER FRAME
A. Squeeze both carry handle release latches
and rotate the handle upwards, into the “carry
position”.
B. Squeeze the left and right triggers of the
CLICK & GO™ adaptors on your Baby
Capsule with both hands. De-latch the Baby
Capsule from the stroller frame.
C. Lift and remove the Baby Capsule away from the frame.
A
A
Rotate
handle
upwards
Squeeze
B
Never fold the stroller frame with an Baby Capsule attached.
Remove the Baby Capsule before folding the stroller frame.
HOW TO REMOVE THE BRITAX
CLICK & GO™ADAPTOR
To remove the Britax CLICK & GO™ Adaptor,
ensure handle is in “rocking position”.
Cover removal is not necessary.
A. Unclip the two Baby Capsule cover elastic
straps which are secured by a plastic hook
under the handle pivot.
B. Carefully remove the screw with a screw
driver. Remove the Locking Pin. Pull out
the adaptor from carry handle.
C. Store for future use with these instructions.
Pull down away
from under handle
Pull out Locking Pin
Unhook
elastic
underneath
the adaptor
TRAVEL SYSTEM
BRITAX CLICK & GO™ADAPTOR