23
Beacon Interval
Beacons are the packets sending by Access point to
synchronize the wireless network. The beacon interval is the
time interval between beacons sending by this unit in AP or
AP+WDS mode. The default and recommended beacon interval
is 100 milliseconds.
Data Beacon Rate
(DTIM)
This is the Delivery Traffic Indication Map. It is used to alert the
clients that multicast and broadcast packets buffered at the AP
will be transmitted immediately after the transmission of this
beacon frame. You can change the value from 1 to 255. The AP
will check the buffered data according to this value. For example,
selecting “1” means to check the buffered data at every beacon.
Short Preamble
Default: Disable. It is a performance parameter for 802.11 b/g
mode and not supported by some of very early stage of 802.11b
station cards. If there is no such kind of stations associated to
this AP, you can enable this function.
Tx Burst
The device will try to send a serial of packages with single ACK
reply from the clients. Enable this function to apply it.
Wi-Fi Multimedia
Item Description
WMM Capable
Choose “Enable” to enable WMM function.
APSD Capable
Turn on this feature so this device can detect whether the
connecting wireless client device has turned on power saving
feature. If yes, this device will send packets with power saving
tag accordingly.
WMM Parameter
Click the button to edit the WMM parameter.
Security (Wireless Security/Encryption Settings)
Summary of Contents for BVH-5101
Page 1: ......
Page 2: ......
Page 29: ...28 Administration Management System Management ...
Page 40: ...28 ...