26
WPS (Wi-Fi Protected Setup)
This function helps to establish the Wi-Fi security. For AP mode, it can be setup one WPS method
including PIN (Personal Identification Number) and PBC (Push Button Certification).
To begin the WPS progress, the WLAN security must be setup first. Please setup one among
WPAPSK, WPA2PSK, WPA/WPA2PSK and then apply WPS setting. WPS will only be available in
these encryption types.
PIN
: query the PIN code in the utility of the WLAN client connecting to this AP, and then enter it in the
PIN field. The Wi-Fi link between the WLAN client and the device should be encrypted.
PBC
: Select PBC, and then you can begin the PBC process. Press the PBC button in the front panel
can also trigger this process. Press or click the PBC button on the WLAN client to finish the
communication. You can press the PBC button on the WLAN client first and then click the PBC
button on this device to establish the encryption.
The options and the information fields are showed below.
WPS Config
Item Description
WPS Capable
Select enable then press Apply button to start this function.
NOTE
:
WPS will be available only with the two conditions:
1
、
WPA-PSK, WPA2-PSK or WPA/WPA2-PSK is set
2
、
Hidden SSID is disabled.
Station List
In the Station list, the information of associated clients is displayed.
Summary of Contents for BVH-5101
Page 1: ......
Page 2: ......
Page 29: ...28 Administration Management System Management ...
Page 40: ...28 ...