ENGLISH
USER MANUAL
BRITEQ
®
1/7
BT-STROBE 1500
OPERATION MANUAL
Thank you for buying this BRITEQ
®
product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in
light show systems.
•
Powerful professional 1500W strobe with big light output
•
Full DMX-control using 2 channels
- Flash-speed: from 2flash/sec up to 12flash/sec
- Light output: from 5% to 100%
•
Single, synchronized flashes can be triggered by DMX
•
Works also in stand-alone mode: light speed controllable on the housing
•
Also works audio triggered when the optional CA-8 controller is used.
•
XLR 3pin DMX in/outputs
•
Automatic “push to reset” fuse
•
BT-STR4, a 4channel DMX-remote controller with audio control, is optionally available
•
Compact and sturdy housing, perfect for rental companies!
•
Very easy lamp replacement
BEFORE USE
•
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
•
Operating instructions
•
BT-STROBE 1500