Insert the appliance into the false chimney breast. With a pencil mark
through the wall fixing bracket on to the wall/studding where you wish
to attached the appliance to the structure.
Please note: Before drilling into walls, always check that there are
no hidden wires, pipes, etc. Make sure that screws and wall plugs
supplied are suitable for supporting the unit in your surface.
Consult a qualified person if you are not sure.
Step 3 – Installing the appliance
Remove the appliance from the position and use an appropriate sized
drill for the chosen wall fixing. If the appliance is to be installed into a
brick masonry wall the supplied wall plugs can be used, to use these
wall plugs drill a
5
/
16
in. wide and 2 in. deep (8 mm wide x 50 mm deep)
hole into the wall. Insert the 2x wall plugs into position, then return
the appliance to its finished position. Screw the wall screws through
the wall brackets on the appliance and into the wall plugs in the wall
and tighten, securing the appliance into position.
Once the appliance is in the correct position plug the appliance into
the wall and check the power to the appliance. Refer to sections
11.0 and 12.0 on how to sync the remote and operate the appliance.
Crosshead screws
Crosshead screws
//
18
© 2022 British Fires
Summary of Contents for EF40-63B
