s
LAST NUMBER RECALL
The Sceptre keeps a continuous record of the last number you called. So
if a call is unsuccessful the first time, the Sceptre will call the whole number
again at the touch of a button. Alternatively, instead of calling that number,
you may get the Sceptre to simply display it for you.
Remember that last number recall will not work if you try to recall a
number more than
16
digits long.
The precise operation for using the last number recall depends on your
telephone system, so please read the following notes care
full
y.
5.1 USING LAST NUMBER RECALL ON A DIRECT LINE
At its simplest you may use the
on its own to recall the last number
you called, regardless of how long ago you called it (assuming the batteries
have not been run down or removed).
LAST NUMBER RECALL (DIRECT LINE)
STEP 1
Lift the handset and wait for the dial tone.
STEP 2
Press
The last number called will be displayed and cal
led automatically for
y
ou
.
NOT
E
:
To display the last number instead of calling it, simply leave the
handset in position and press
1m1.
When you are ready press
lliill
to get
back to the Clock display.
-
-
5.2 USING LAST NUMBER RECALL ON SWITCHBOARDS
The precise operation of switchboards varies from system to system.
On automatic switchboards you will need to key an "access code" to get
an outside line. But whereas on some you have to wait until you hear the
external dial tone, (an "access pause") on others no "access pause" is
necessary - you don't get the external dial tone even if you do wait.
LAST NUMBER RECALL ON SWITCHBOARD
(NO ACCESS PAUSE)
STEP1
STEP2
STEP3
Lift the handset and listen for the dial tone.
Press IDllonce.
The Sceptre will call your last number, including the access
code, without any further action from you.
