12
Erasing a stored number
If you want to erase a number in the stored
memory, simply store a new number into this
memory location.
Dialling complex stored numbers
Your Minstrel plus phone can be changed to
Touchtone dialling after f1nish1ng pulse dialling
by pressing the button marked* and labelled
MF.
You can dial combinations of numbers,
typically for combining access and
authorisation codes with stored or unstored
telephone numbers.
press*
There is a
4
second pause 1n the dialling
sequence and t appears in the display.
The dialling is now MF and you can
continue to dial the rest of the numbers.
The phone reverts to LO dialling
when you replace the handset.
Combining numbers stored in different
memory locations
You can make calls using two separate
numbers from the memory for instance, one
key for the dialling code, followed by another
key for the phone number.
Lift the handset and wait for the dial
tone
press
the memory button which holds the
dialling code. Wait for the digits to
be dialled.
press
the memory button which holds the
remainder of the telephone
number. Wait for the digits to be
dialled.
note
if an access digit is used to obtain
a
PSTN
line from behind a
PABX
then after dialling from memory,
wait for secondary dial tone before
proceeding.