Function Setting
- continued
14
Set Reference Pressure - the preset pressure – 2.4 Bar
To reset reference pressure for different types of cars, follow the steps below.
1 standard air pressure - 1bar = 1000Kpa = 14.5psi = 1.02*10
4
kgf/m
2
.
(a) Enter setup mode and select the
interface of Set Reference Pressure
(b) Press SET to enter the interface
of the setup mode of Reference
Pressure, the system shows the
present reference pressure.
(c) Press SCAN, the pressure will
increase by 0.1bar or 1psi and will
cycle among 0.5–2.8bar or 7–41psi
(d) Press SET after confirming the
new reference pressure.
(e) The system will enter into the
reference pressure setting of back
tyres automatically after setting
front tyres pressure and show the
current reference pressure. Set the
new reference pressure step (c) and
(d).
(f) The system will quit reference
pressure setting mode automatically
in case of no operation in 10
seconds. The original reference
pressure will keep unchanged. The
system will enter into next interface
after setting or automatic quitting.
