Function Setting
- continued
Ty r e P r e s s u r e M o n i t o r i n g S y s t e m
15
ID Exchange
After some period of time in use, the tyres should be exchanged to prolong their lives. The ID positions of the sensors should be
exchanged accordingly. For example the front right wheel changes with the back right wheel.
(a) Enter setup mode and select the
interface of ID exchange.
(b) Press SET to enter the ID
Exchange mode. It will show the
position of the front left wheel and
its ID.
(c) Press SCAN, select the front
right wheel then press SET to
confirm.
(d) Press SCAN select the back right
wheel (indicator of selected tyre will
be kept unchanged).
(e) Press SET to finish the ID
Exchange. The system will quit ID
exchange mode automatically in
case of no operation in 10 seconds,
the ID will not be exchanged. The
system will enter into next setup
interface after setting or automatic
quitting.
Repeat the steps to
exchange other ID.
