Step 1
S-SERIES | 20x20
4
Inspect the tent site thoroughly for obstacles, underground and overhead
wires, pipes, etc. If necessary, consult with your local utility company prior
to installation.
Step 2
Lay out the erection site by first placing the corner brackets, perimeter pole
connectors and perimeter poles in sequence per the diagram to the left for
assembly. Do not install legs at this time.
Step 3
Begin assembly of the frame by inserting the perimeter poles into the perime-
ter pole connectors. Then, connect the perimeter poles into the corner brack-
ets. Continue this process until the perimeter framework is assembled.
Step 4
Attach cross cables to opposite corners of the structure per the diagram to
the left. Use turnbuckle on cables to tighten them to the proper tension
(cables should be taught and not touching the ground. Caution: over-tension-
ing will cause the perimeter poles to bow in towards the center of the tent.)
