3
Importer: Speli Baltic OÜ, Tallinn. Tel. +372 6700623; info@speli.ee
EN
Fitting the legs
The front and rear legs are a different width.
Please be aware that the rear leg is narrower at the top
than the front leg.
Identify which leg is the rear and which is the front.
Remember that the front leg attaches to the back of
the highchair (A) whilst the rear leg is attached to the
front (B).
Push a pair of the legs a little way into the seat frame
tubes and push in the spring pips, continuing to push
the legs until the pips appear in the holes.
Repeat this process until each leg is fitted securely.
Should the highchair need to be taken apart, gently
push in the sprung pips with a small screwdriver and
evenly ease out the legs assemblies.
The fit of the legs in the frame is very tight for added
security. Do not force the legs into position, but apply
an even and constant pressure.
Folding your highchair
You must undo the crotch strap before
folding the highchair. Unclip the tray and
lift upwards. Fold legs together.
Summary of Contents for Alpha
Page 2: ......
