8-Button Wall Plate Ethernet Keypad User Manual (LB-KP8E-ICP / LB-KP16E-ICP)
7
TELNET COMMANDS
COMMAND
DESCRIPTION
PARAMETER
IPCONFIG
DISPLAYS THE CURRENT IP CONFIGURATION NONE
SIPADDR XXX.
XXX.XXX.XXX
SET ETHERNET IP ADDRESS
XXX=0-255
SNETMASK XXX.
XXX.XXX.XXX
SET ETHERNET NET MASK
XXX=0-255
SGATEWAY XXX
XXX.XXX.XXX
SET ETHERNET GATEWAY
XXX=0-255
SIPMODE N
SET ETHERNET IP MODE
N=STATIC/DHCP
VER
SHOW UNTIL FIRMWARE VERSION
NONE
FADEFAULT
ALL CONFIGURE AND MACRO
SET TO FACTORY DEFAULT
NONE
ETH_FADEFAULT
ALL ETHERNET CONFIGURE SET TO FACTORY* NONE
REBOOT
SYSTEM REBOOT
NONE
HELP
SHOW COMMAND LIST
NONE
HELP N
SHOW DESCRIP OF COMMAND
N: COMMAND NAME
RELAY N N1
RELAY CONTROL
N(PORT)=1
N1=OPEN/CLOSE/TOGGLE
LEDBLUE N N1
LED BLUE BACKLIGHT CONTROL
N(LEN NO.)~1-8
N1=% (1-100)
LEDRED N N1
LED RED BACKLIGHT CONTROL
N(LEN NO.)~1-8
N1=% (1-100)
LEDBLUES N
ALL BLUE LED BACKLIGHT CONTROL
N=% {0-100}
LEDREDS N
ALL RED LED BACKLIGHT CONTROL
N=% {0-100}
LEDSHOW N
LED DIMMING MODE CONTROL
LEDSHOW N
N=ON/OFF/TOGGLE
BACKLIGHT N
ALL LED BACKLIGHT CONTROL
N=% {0-100}
KEY_PRESS N RELEASE
KEY_PRESS N HOLD
KEY PRESS TRIGGER TYPE
KEY_PRESS N RELEASE
KEY_PRESS N HOLD
N=PORT NUMBER
N=PORT NUMBER
MACRO N
MACRO SETTING
MACRO RUN N N=MACRO
ID (1-16)
MACRO STOP
TELNET_TIMEOUTN
SET TELNET TIMOUT ON/OFF
N=ON/OFF
NOTE: ANY COMMANDS WILL NOT BE EXECUTED UNLESS FOLLOWED
BY A CARRIAGE RETURN. COMMANDS ARE CASE-SENSITIVE
