10
OPERATION CONTROL AND FUNCTIONS
HDBaseT 18G/4K HDR HDMI 4-Play AVLC Transmitter & Receiver User Manual (LBC-H2V-T-4P / LBC-H2V-R-4P)
RECEIVER- REAR PANEL
LBC-H2V-R-4P
DC 24V Terminal Block
: Plug the 24V DC power adapter into this terminal
block and connect it to an AC wall outlet for power. (Optional)
Note
: This connection is not required if the unit is receiving power via 24V
PoC from the Transmitter.
IR BLASTER Port:
Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices within direct line-of-
sight of the IR Blaster.
IR EXTENDER Port:
Connect to an IR Extender to receive IR control signals
and extend them to devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-sight of
the IR Extender.
CAT5e/6/7 IN Port:
Connect to a compatible HDBaseT Transmitter with a
single Cat.5e/6/7 cable for transmission of all data signals. 24V PoC can also
be supplied to, or received from, a connected compatible Transmitter.
Note:
The 24V PoC function is designed to power, or receive power from,
compatible Receiver units only. Non-PoC Transmitter will need their own
power supply. Other brands of Transmitter may not be compatible.
HDMI OUT Port:
Connect to HDMI source equipment such as a media player,
game console, or set-top box. DVI sources are supported with the use of an
HDMI to DVI adapter.
1
2
3
4
5
1
3
2
4
5
