install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.1.1 Accessing Inputs 10-18 with Shift
For shows that consist of more than 9 inputs, the [Shift] button is used to access sources
10-18. This enables the Broadcast Pix panel to control twice as many sources as there
are buttons for. These “shifted sources” are typically used for sources that are used less
frequently than the first 9 sources, such as black or a rarely used extra tape deck.
To access a sources 10-18:
1.
Press the
[Shift]
button, and it will
illuminate, and the source displays on the
program row will change to the names of
sources 10-18.
There is no need to hold down
shift, since the panel will stay in the
shifted state until it is deselected.
2.
Select a button from the Program, Preview
or Source rows, as desired
.
The selected
button will illuminate. To indicate that this
button is in a shifted state, on the
SoftPanel a small light above it will
illuminate, while on the Control panel the
button will blink.
3.
Press the
[Shift]
button again, which will
turn off the illumination of the shift button,
and return all source buttons to their
unshifted state. The control panel will
continue to have the selected source
blinking and the small light on the
SoftPanel will stay on so you know a
shifted source has been selected. Once a
direct or unshifted source is selected the
blinking will stop.
4.1.1
Shift
Mix Fx
