install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.1.1 Accessing Inputs 10-18 with Shift
For shows that consist of more than 9 inputs, the [Shift] button is used to access sources
10-18. This enables the Broadcast Pix panel to control twice as many sources as there
are buttons for. These “shifted sources” are typically used for sources that are used less
frequently than the first 9 sources, such as black or a rarely used extra tape deck.
To access a source in the 10-18:
1.
Press the
[Shift]
button,
and it will illuminate, and the source displays on the program row will
change to the names of sources 10-18. There is no need to hold down
shift, since the panel will stay in the shifted state until it is deselected.
2.
Select a button from the Program, Preview or Source rows, as desired
.
The
selected button will illuminate. To indicate that this button is in a shifted
state, on the SoftPanel a small light above it will illuminate, while on the
Control panel the button will blink.
3.
Press the
[Shift]
button again, which will turn off the illumination of the shift
button, and return all source buttons to their unshifted state. The control
panel will continue to have the selected source blinking and the small light on
the SoftPanel will stay on so you know a shifted source has been selected.
Once a direct or unshifted source is selected the blinking will stop.
4.1.1
Shift
