install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.4.7 To Change the Key Fade Rate
The fade rate for all 6 Keys can be set with a knob or the numeric keypad in the PixPad.
To change the key fade rate:
1.
Press the
[Key Select]
button for the desired keyer, to assign the Device
Controls to that key.
2.
Turn the
[left knob]
to the desired transition rate, which will be shown after
the letters Ra in the display above the knob.
or
Press the
[Key Rate]
PixButton on the Key PixPad for the desired Key, enter
the rate with the
[numeric keypad],
as done for a transition rate, and press
[Enter]
to apply the rate.
Key 3 (Ra45)
Rate
4.4.7
