install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
4.5.1 To Create a DVE Box:
1.
Press the Key transition button for the desired keyer, either
[Key 1 Transition],
[Key 2 Transition]
or
[Key 3 Transition]
, and it will illuminate orange, and the
content of the key will appear on the preview monitor.
2.
Select the Keyer you wish to use by pressing either
[Key 1 Select]
,
[Key 2
Select]
or
[Key 3 Select]
. This will assign the Device Controls to the Keyer
selected, as described in section 4.4.2.
3.
Press the
[DVE OnOff]
PixButton on the PixPad, which will cause the word
(DVE) to appear in the display to let you know the DVE is applied, as shown
below:
Key1 (Ra1, DVE)
Rate
4.5 DVE Boxes (Picture in Picture)
All 3 Keyers may have a DVE (Digital Video Effect) Box, otherwise known as a Picture-in-
Picture, applied to it. In television news shows, the DVE Box is used extensively for “over-the-
shoulder” boxes that may contain a still, clip or another camera.
The DVE Box enables one video or graphic to be
placed in a smaller picture on top of the background
video.
4.5
