install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
1.
In BPswitcher select the
File
drop down
menu.
2.
Select the
Capture Still
menu
.
3.
Select the desired output from the available
list
Program
or
Preview
to capture a still of
what is currently on that output, as shown on
the right.
4.
Once captured, a pop-up window will appear
to notify you that a still has been successfully
captured. It may take a few seconds for this
window to appear.
Click on the
OK
button.
A file named preview.bmp or program.bmp,
will be created in the Capture Folder.
If a custom name is used for the output
window, then that custom name will be the
filename.
4.13
4.13 Capture of Stills
The Broadcast Pix system can capture a still image of any processed output, i.e. program or
preview, in addition to any external inputs connected to the Switcher. The still image can then
be loaded into a still store and used in a production or exported to a graphics system. Only
outputs viewable on the Fluent-View can be captured. All signals are captured at a
1920x1080 resolution.
4.13.1 To Capture an Output Image:
NOTE:
If it is desired to capture more than one still image, it is necessary to rename the file that is saved to
the Capture Folder, since any other captures will overwrite the first one.
