install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
5.9.7
Daktronics Controller - Rear
Broadcast Pix Server - Rear
Daktronics All Sport CG - Rear
¼
TRS Male to DB-9 Pin Female
(use any J-Port Scoreboard Output)
Straight RS-232 DB-9 Pin Female-Male
(use any port on the Edgeport)
¼
TRS
Male
DB-9
Female
Tip
8
Ring
9
Sleeve N/C
* Power must be applied to all 3 devices
Daktronics controllers, like the All Sport 3000, 5000 & 5500, can be
connected to RapidCG to have the ‘TV Feed’ information from the
scoreboard link to your on-air graphics. The ‘TV Feed’ of Daktronics supports
basic scoring and timing information for the following sports:
Basketball, Baseball, Football, Hockey, Lacrosse, Soccer and Volleyball.
The Daktronics feed is connected using a RS-232 serial connection from a Daktronics
All Sport CG interface box, which must be purchased through Daktronics, to the Broadcast
Pix Server. Since the Flint system does not have any serial connections, an Edgeport
Serial extender will be necessary. The All Sport CG automatically receives the data feed
from the connected Daktronics controller using a
¼
TRS (Stereo) to DB9 pin cable (a
wireless option is also available through Daktronics). Note the All Sport CG should be set
to the Automatic Mode (refer to the All Sport CG manual for more information) to guarantee
proper connectivity.
Only one instance of Rapid CG can update data from a Daktronics feed, however
multiple pages may be linked to the same feed.
For any operational or sales questions regarding Daktronics equipment, please contact
Daktronics directly at 1-800-325-8766.
To Setup the Daktronics Controllers:
USB A-B Cable
(use any USB 2 port)
