install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
To import an EZNews Project file:
1.
Ensure that the .Scribe file are created
and saved in the
C:graphics\EZNewsTemplates,
folder as shown on the right.
2.
In Rapid CG, click on the
Fluent RapidCG
menu, and a drop down menu will appear.
3.
Click on
Project
, followed by
Import
EZNews Project…,
as shown on the right.
4.
A Load EZ News Project warning box will
appear stating that the Content panel will
be cleared and replaced with the EZNews
contents.
After ensuring that your Project is safe to be
replaced, click on the
OK
button, as shown
on the right.
5.
In the Windows Open window,
navigate
to where the EZN file lives. This files can
live on the Broadcast Pix system or on any
remote/networked system.
6.
Click on the
OK
button, as shown on the right.
7.
Rapid CG will now link the date from the EZN
file to the Scribe template files in the EZN
Templates folder.
If any templates are not present the folder
or if content is missing, a pop up message will
appear at the end of the import notifying you
of any offline items.
5.9.10
