install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
6.5.6
To start recording a new clip:
1.
If recording has been configured on channels
on the external server (refer to your server’s
documentation), then the starting and stopping
of records may be initiated. Currently recording
only functions on Grass Valley K2 servers.
Ensure that the DDR control is selected and a
record channel has been selected.
Press the
[Controls]
PixButton at the bottom of
the PixPad, which will bring up a new PixPad,
as shown on the right.
2.
Press the
[Start Record]
PixButton.
The display will change to a generic clip name of
‘Clip_XXX’ with the status changing to Record.
The time code will start to count up, showing how
long the clip has been recording for.
The duration will start to count down, showing how
much space/time is left on the external server.
In addition, the [<] and [>] motion control buttons
will both illuminate orange to signify that a
recording is taking place, as shown on the right.
Up to 999 clips may be recorded sequentially,
however the clip name may be manually changed
locally on the external server, allowing for
unlimited clip records.
