install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
7.11.1 Recalling Preset Camera Positions
Preset Positions are designed to be recalled rapidly. When using Telemetrics
Studio Software, sequences stored in the CTS-ST-S may be triggered by the
Broadcast Pix at the stored recall speed.
To recall a preset position:
1.
Select the desired camera from the list available on the top level PixPad for
camera control as shown on the lower left, such as Camera 1. The Preset
Positions PixPad for the selected camera will appear, as shown on the lower
right.
On Panasonic & Sony cameras, when only 1 camera is assigned in the
Camera Control Settings window, the first page of camera numbers is
automatically skipped. Selecting the Camera Control Device button will bring
up the Preset PixPad.
2.
If you want to recall one of the first 9 positions for this camera, press the desired
preset position PixButton and that preset will be loaded, the camera will move to it,
and the large display will show that preset position number as shown below.
7.11.1
