install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
1.11.2
1.11.2 Selecting between 60 and 50 Hz
As described in section 1.7, when first launched the Welcome Screen allows you to
setup the system with the correct video standard (NTSC / 60 Hz in most of the
Americas and Japan and PAL / 50Hz in Europe and other countries). The system
may be switched between 1080i/59.94 Hz and 1080i/50Hz at any time.
To change between 60 / 50 Hz:
1.
In BPswitcher, click on
Setup
and a
drop down window will appear, then select
System Settings…
as shown on the right.
The System Settings window will appear,
as shown below.
2.
In System Settings window, click on the
Video
Tab, which will bring up the
various video settings.
3.
Select either the
1080i/59.94
or
1080i/50
radio button under the Video
Standard section.
A status message will appear, asking
to restart the application.
4.
Click on the
OK
button.
This will close the System Settings
window.
5.
Close the BPswitcher application by
selecting the
File
menu then
Quit.
6.
Restart the application by double-clicking
the Broadcast Pix Switcher on the
desktop.
To switch back the video standard,
repeat steps 1-6.
