install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
FLINT
V1.1
7.20.1
9.
Under the Audio section, ensure that
the Device drop down menu is set to
Broadcast Pix Audio,
as shown on
the right. Selecting any other option
will not function and may display a
popup message.
10.
Under the Format drop down menu
select the desired audio format for the
stream, either
AAC
or
MP3.
Check
with your CDN on the recommended
setting. Ustream recommends AAC.
11.
Under the Sample Rate drop down
menu select
441000 Hz.
12.
Under the Bit Rate drop down menu
select the desired bit rate for the
audio. A normal setting is
96
or
128
kbps. Check with your CDN on the
recommended setting. Ustream
recommends 128 for HD streams and
96 for SD streams.
13.
Under the Output section, place a
check mark next to
Stream to Flash
Media Server,
as shown on the right.
14.
In the FMS URL text field,
enter
the
rtmp URL provided by your CDN.
Ensure to type
rtmp://
before the
address.
15.
In the Stream text field,
enter
the
stream key provided by your CDN.
To obtain the RTMP address and
Stream Key in Ustream, login to your
account, select
Channel
on the left
navigation bar, then select
Remote.
The RTMP address and Stream Key
will be visible, as shown on the right.
