9
STATUS
The status signals from the front panel indicator LEDs are supplied
through the remote control connector as individual open collectors.
This may provide status to a remote control point to indicate which
source is selected. The status output for the selected output will go low,
providing a return for an LED indicator or TTL/CMOS logic. External
10 K ohm pull-up resistors may be required in some installations.
J1 Status pin numbers:
7 -- Status number
1
8 -- Status number
2
9 -- Status number
3
10 -- Status number
4
11 -- Status number
5
12 -- Status number
6
APPLICATIONS
Typical switching applications include: Studio selection, Audio
processing select, Exciter input select, Remote broadcast input selection,
STL source selection, Automation source selection, Phone hybrid
send/receive selection, IFB selection, Satellite audio channel switching
and console monitor inputs and outputs selection.
6 X 1B Stereo Audio Switcher/Router
Broadcast Tools, Inc.
