e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
5
AVR-8 Installation and Operation Manual
PROGRAMMING
PROGRAMMING
To program the AVR-8, follow the instructions below. Remove the top cover and
locate the modular RJ-11 jack in the left top corner of the circuit board. Plug in a
standard TT telephone into the programming RJ-11 jack. Press the program button
followed by the address of the desired operation followed by the data to be stored or
the message to be recorded followed by pressing the program button. For example,
to program a dial out number of 8540808 in the number 1 slot: Press the program
button, enter 118540808 and press the program button again. When the program
button is pressed the green PWR led will blink to confirm that it has been placed in
program mode.
WEBSITE:
Visit our web site for
product updates and
additional information
Dial Out Numbers/Messages
Keypad entry
Dial out number
(1)
11nnnnnnnnnnnnnnnn
Example:
1113608549559
Dial out number
(2)
12nnnnnnnnnnnnnnnn
Example:
125551212
Dial out number
(3)
13nnnnnnnnnnnnnnnn
Example:
1315415551111
Dial out number
(4)
14nnnnnnnnnnnnnnnn
Example:
1417605551234
Dial out number (5)
15nnnnnnnnnnnnnnnn
Example:
155415559876
Dial out number (6)
16nnnnnnnnnnnnnnnn
Example:
1619545553418
Dial out number (7)
17nnnnnnnnnnnnnnnn
Example:
175554321
Dial out number (8)
18nnnnnnnnnnnnnnnn
Example:
1812025555678
Pager Dial out (9)
21nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
Example:
2118007597243***123456789#
Pager Data
22nnnnnnnnnnnnnnnn
Example:
22**9876#
Security Code
23nnnnnnnnnn (Default 123)
Example:
232580
